SAM TFT7.0 Touch

Hardware

• Control system based on the ATSAM4E-16C

 32 bit Arm with floating point

• East Rising 7.0" 480x800 TFT color display with integrated SSD1963 controller from BuyDisplay.com Controlled by parallel interface of 16/18 bits

• Resistive touch screen with AD7843 controller

• External memory of 16 MB to store data or images

• Real-time clock with calendar and supercap backup

• 5 analog inputs of 12 bits, 0 ... 2.048V, 0 ... 10V, 4-20 mA

• An analog output 0 ... 10V of 12 bits

• Encoder and buttons connectors

• Three digital outputs 0 / 12V of 500 mA with ULN2003A

• Two PWM outputs

• USB Device 2.0 communication

• CAN BUS communication

• Communication Rs485

• I2C communication

• SPI bus with CS signal available

• Does not need a programmer. USB programming with SAM-BA Bootloader

• SWD / JTAG connector for programming with Atmel-ICE

• 12V supply voltage (from 9V to 15V DC)

• Maximum consumption current 150 mA

Software

• Several examples programs in C for the treatment of each of the hardware modules.

• All projects compiled with the free IDE Atmel Studio 7

• Graphic library for representation of characters and images on the Display with great simplicity.

• Geometric graphic library (Lines, Triangles, Rectangles, Pixels, etc.).

• Windows application, which allows to transfer Bitmaps from the PC to the flash memory of the board, through the USB bus. It also allows to take the micro to bootloader mode, for programming with Sam-ba.